SHIMGE SGJW-S Series Self-Priming Jet Pump 0.5HP & 1HP & 1.5HP | Pam Air Kebun Fertigasi Rumah Water Booster Pump

[ Produk Keterangan ]
SGJW-S ( 0.5HP / 1.0HP / 1.5HP ) Manual (on/off)
- Cast Iron Impeller Pump
- 2 dalam 1 (sedut dan tolak air)
- Tolak air : > 52 meter
Jika tolak diatas tanah max 520meter tanpa belok
- Sesuai untuk Pertanian/Perindustrian
* KHAS untuk air SEDIKIT jarak JAUH.

[ Product Overview ]
SGJW-S Self priming jet pumps utilizes the principle of water injection to achieve high suction, high lift and anti-fine sand functions, and is a comprehensive pump product with high performance. It can be used under any possible operating conditions. During the fluid transition, the jet pump may exhibit positive pressure positive flow, positive pressure reverse flow (or positive pressure reverse flow) and negative pressure positive flow.


[ Product Features ]
The pump head is made of high quality of cast iron, so the pump body is not easy to rust and easy to clean;
The matching between the injector and the impeller is high, and the pump body cavity is large, and the self-priming ability is strong; It uses a traffic priority system to enhance the use of the pump; The water pump line package is equipped with an overheat protector to prevent the electric wave from being too large or the foreign matter jamming the impeller to damage the motor.


[ Application Limits ]
- Suction head up to 9m
- Liquid temperature : up to 40°C
- Ambient temperature : up to 40°C
- Max. Working pressure: 6 Bar
- Voltage fluctuation should not exceed 10% of rated value.
- pH: 6.5 to 8.5
- Protection: IP44
- Insulation: Class B


[ Applications Fields ]
- Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
- Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc.
- It can be used for domestic water, floor pressurization, agricultural irrigation, underground well water, solar boosting, etc.

[ Product Specification For 0.5HP ]
- Model : SGJW37S 
- Power : 0.5HP (370W)
- Voltage : 240V
- Max. Head : 32 Meter
- Max Flow : 50 L/min
- Head Range : 2.5 - 32 Meter
- Max. Suction : 8 m
- Inlet /Outlet (inch) : 1" x 1"

[ Product Specification For 1HP ]
- Model : SGJW75S 
- Power : 1HP (750W)
- Voltage : 240V
- Max. Head : 45 Meter
- Max Flow : 75 L/min
- Head Range : 4.5 - 45  Meter
- Max. Suction : 9 m
- Inlet /Outlet (inch) : 1" x 1"


[ Product Specification For 1.5HP ]
- Model : SGJW110S 
- Power : 1.5HP (1100W)
- Voltage : 240V
- Max. Head : 52 Meter
- Max Flow : 90 L/min
- Head Range : 5 - 52  Meter
- Max. Suction : 9 m
- Inlet /Outlet (inch) : 1" x 1"